GreatFrontEnd is becoming my go-to resource for new tasks, tasks that could be asked in an interview setting. It also gives me so many more ideas for topics to write about.
I think that's a win-win situation, don't you?
Anyway, let's get back on track and discuss a new challenge I was working on. The brief was quite simple:
Build a fill function that fills an array with values from start up to, but not including end. The function must mutate the array.
Here's the arguments accepted:
array: the array to fill
value: the value to fill the array with
[start=0]: the start position
[end=array.length]: the end position
I want to be open and honest in my articles, so do you know what happened? I ended up not finishing the challenge.
When I approach these task I have a specific set of requirements that I want to follow:
searching on the web or documentation (thanks, Dash) is allowed
chatting with an AI is allowed only if the questions that I make do not involve the solution. For example, in this case, I am allowed to discuss the approach that I could take but not have the AI produce any code for me
don't spend more than 30 min per task (probably for some advanced tasks it won’t be enough)
Before presenting the solution proposed from the platform and my elaboration, I want you to know why I failed because there's a lesson that could also be helpful to you.
I failed because I got too in love with my idea.
You see, solving problems requires a part of memory and another of creativity. With the first, you scan your brain, looking for something similar that you've already encountered, while with the last, you just start to go off, experiment, and have fun.
In this case, I was too focused on the first part. While trying to solve the exercise, knowledge of splice, slice, and at came to mind, and I started to write a lot of code to make my code respect the specs and pass the tests.
Then the time expired, and my code was still not working.
In an interview situation, this doesn't look good. Not only because you couldn't solve the task they gave you but especially because you let your convictions pull you in a direction that wasn't viable. You weren't "brave" enough to trash the first approach and experiment with something different.
This is why I decided to work with coding challenges and side projects while looking for my next position. While you're focused on the code, you also learn something different that will empower your soft skills and the way you work.
In this case, I learned that I must trash ideas and experiment with new approaches sooner.
Back to the code, though, which was the solution proposed by GFE?
The accepted solution
export default function fill(array, value, start = 0, end = array.length) {
const length = array.length;
if (start < 0) {
start = -start > length ? 0 : length + start;
}
if (end > length) {
end = length + 1;
}
if (end < 0) {
end += length;
}
for (let i = start; i < Math.min(end, length); i++) {
array[i] = value;
}
return array;
}
The code works, and it's also easy to reach since each step is defined by an if. But I couldn't help myself as see this code and think about how to make it shorter and even easier to understand.
Let's try to define block by block what this function does.
const length = array.length
This should be simple; since we will refer many times to the array.length value, we will use the variable length to save some typing.
if(start < 0){
start = -start > length ? 0 : length + start;
}
Let's begin with the real logic. Since the function we're building does not require accepting negative indexes, the first thing we do is check if the user of the function has passed a negative number by mistake. If so, we will turn the value into a positive number, and we will check if it is greater than the length of our array. If it is, we will start from the beginning of the array by returning 0; otherwise, we will convert the index into a positive value by adding length to star so we will be able to use it inside the for loop at the end.
if (end > length) {
end = length + 1;
}
Your for loop will not run for end values, which could be too high. Because if you think about it, if a user inserts an enormous number for end and the array has only 5 values, our loop will run for no reason. While I understand why this block exists, I wouldn't say I like it because it makes things more confusing.
if (end < 0) {
end += length;
}
And since end cannot be negative, well, not even smaller than start for that matter, we set at the length of the array. If you are thinking "shouldn't it be greater than length, as we did earlier?", you'll need to check the condition of the for loop to understand why.
for (let i = start; i < Math.min(end, length); i++){
array[i] = value
}
This is the real deal, the part of the code where we modify the array's items and solve the challenge.
First and foremost, we have the i variable set at the same value as start, which will begin our substitution. Then we check if the current index is still lower than the minimum number between end and length, and as usual in a for loop, if the condition in the middle is true - i is lower than end or length - we keep increasing the index.
Then, we will use the index to access the specific position of the array and swap any value that it holds with the value passed to the fill() function.
My take on the solution
While this function does what it is requested, personally, I didn't like much how the logic was playing out.
Not that there is something wrong, but I believe that once you find the solution to your task, if you can, you should spend some time and think about optimizing it for both machines (performance) and humans (readability).
So I've started to check the code, and I started to ask myself:
shall I reorganize and/or reduce the code that solves the challenge?
is it possible to simplify the ifs used and streamline the thinking behind its value?
there are some array methods that will simplify the code?
Let's start from the last, as far as I've experimented, there is no good array method that lets you loop in an array and that allows you to set a start and end value. You could achieve something readable with reduce, but it increases the complexity of the code, so it's better to avoid it.
But I've found quite satisfying the other two points.
The first thing that I tackled has been the logic for start and end, and I've been able to made just one-liners.
start = Math.max(start < 0 ? start + length : start, 0);
end = Math.min(end < 0 ? end + length : end, length);
The code we had before was using a ternary, so why not use them to just create a one-liner?
For the start, we're always interested in the greatest number that we can calculate, that's why we use Math.max, then starts (no pun intended) the logic and I think you're gonna like the following deep dive.
Let's start with something these functions have in common: they both use a Math method that accepts two or more arguments. In both situations, we use the first ternary operator to generate the first value, and the second is just our base. Now let's discuss the logic of each.
If start is negative, we just add to it the value of length. Even if the result of start + length is still negative, we will still return 0 because we have Math.max that considers 0 (the last value we pass to the function) greater than the negative number.
If instead, end is a negative value passed by the user, we add length to it to convert the negative index to its corresponding positive one. Otherwise, we just return end. And in order to get the value that we will use in our for, we have to find the minimum value between the end that we just calculated and the length of the array.
Once we have them, we can setup the same for loop as before. Just a little bit simplified:
for (let i = start; i < end; i++) {
array[i] = value;
}
From my perspective, this for loop is even simpler to understand (and maybe also more performant) than the one we had before. And that's especially true because we do not use Math.min in each loop to understand which value use for end, we just use the value we calculated few lines above.
That's it.
export default function fill<T>(
array: Array<T>,
value: any,
start: number = 0,
end: number = array.length,
): Array<T> {
const length = array.length;
start = Math.max(start < 0 ? start + length : start, 0);
end = Math.min(end < 0 ? end + length : end, length);
for (let i = start; i < end; i++) {
array[i] = value;
}
return array;
}
I hope you found this article as useful as it has been for me to write it. I'll keep writing these deep dives on GreatFrontEnd challenges because I am using it extensively to practice my tech interview capabilities since I am looking for a new position 😅
